Question or inquiry? Text 604-220-1022
Cheetah Factory Racing
CFR was started in 1999 by dedicated shredder Dave Basterrechea. Dave started snowboarding in 1987 and was instantly hooked. Snowboarding took Dave all over the world competing and filming until he landed in Whistler BC Canada in 1997. Dave started using snowmobiles to get into the backcountry to go snowboarding that year. Snowmobiling quickly became the way to get into the Mountains and access the amazing terrain surrounding the Whistler BC area. Carrying your snowboard in your back pack was the only way to carry your snowboard back then. Dave felt that carrying his snowboard on his back was getting in the way of his snowmobiling, especially when tandeming up with another person. Dave built a prototype snowboard rack for his snowmobile in the summer of 1999 and began testing that winter. The design worked. Soon Dave realized that skiers needed racks to carry there skis and poles. In 2000 Dave built a rack for skis as well. The CFR snowboard and ski racks were the first snowboard and ski racks available on the market. In 2011 Dave was not happy with the stock handlebars on his snowmobile. They bent easy and he couldn't find the sweet spot on them. After trying all of the other handlebars on the market he decided to design his own. This started the snowmobile control division of CFR. With feedback from all of his team riders a line of signature bars and the flagship Boondocker bar were born. All of the products have been tested in some of the most demanding conditions by snowmobilers, skiers and snowboarders. Bumped out icy trails in the morning and accidental rollovers with hundreds of hours getting used and abused. CFR products are built to last.
Filters
CFR Brett Turcotte Handlebar
The CFR Brett Turcotte Handlebar is the handlebar of choice for Brett and his mind-blowing snowmobile skills. From the snowcross track to the backc...
View full detailsCFR Kersterke Handlebars
The newly designed Caleb Kersterke handlebar is Caleb’s design from end to end. The Small diameter grip (SDG) area allows added grip strength to ge...
View full detailsCFR Snowmobile Handlebar Grips
These new and improved CFR Snowmobile handlebar grips are injection-molded with super tacky rubber. The ultra-thin diameter rubber compound will fi...
View full detailsCFR Bar Pad
5.0 / 5.0
1 Review
The CFR Bar Pads are created to suit all CFR handlebars, as well as any handlebar with an oversized and large diameter. Its dual density foam serve...
View full detailsCFR Snowmobile Handlebar Heaters
These universal-fit snowmobile handlebar heaters will work on any snowmobile. The three-wire universal grip heater element kit with high/low temper...
View full detailsCFR New Rigid Mountain Strap
The new CFR Rigid Mountain strap allows a solid grab handle for tricky maneuvers and tandem snowmobiling. The bar clamps have been slimmed down so ...
View full detailsCFR Knucks Riser Cluster Relocate
Clean up your handlebar controls and move them out of the way with this easily installed relocator. The Xm and Gen4 Cluster Relocates are installed...
View full detailsCFR Dual Ski Bracket Kit
The CFR Dual Ski Bracket Kit will keep your skis and poles out of the way while breaking trail to your favourite line or jump spot. This system can...
View full detailsCFR Mountain Rack
The Cheetah Factory Racing Mountain‚ Rack is a low profile light weight weapon.‚ Dropping the center‚ of mass and weight of the rack allows the sno...
View full detailsCFR Hard Enduro Handlebars
The new CFR Hard Enduro bar is designed to be able to take anything you can throw at it. Made from 7075 aerospace aluminum that is both strong, yet...
View full detailsCFR Goat Skull Flat Brim Baseball Hat (CLEARANCE)
CFR Goat Skull Flat Brim Baseball Hat
CFR Bar Pad 2.0
The newly designed CFR bar pad has a sleeker, meaner and softer design to fit all CFR handlebars or any oversized large diameter handlebars. The du...
View full detailsCFR LINK-IT-UP 2.0 Rack
The CFR Link It Up 2.0 is the newly designed flagship snowmobile rack designed in conjunction with the all-new Boardski Bracket Kit 2.0 to be the u...
View full detailsCFR Mountain Rack - Narrow
The CFR Mountain Rack-NRW is designed specifically for Polaris and Arctic-Cat snowmobiles. The 16” width and pre-drilled holes in the mounting plat...
View full detailsCFR Skull Flat Brim Baseball Hat (CLEARANCE)
CFR Skull Flat Brim Baseball Hat
CFR Rigid Mountain Strap
The new CFR Rigid Mountain strap allows a solid grab handle for tricky maneuvers and tandem snowmobiling.‚ The two forged bar nuts attach the strap...
View full detailsCFR Regular Snow Scratchers
The CFR Regular Snow Scratchers are a cost-effective way to prevent the overheating of your snowmobiles Motor on those early morning long approaches.
CFR Moto Bar Pad
The Cheetah Factory Racing Moto Bar Pad‚ is designed to fit the CFR Hard Enduro Moto Bars. The Dual density foam will protect against sharp corners...
View full detailsCFR Skull Tag Toque
Stay warm and look cool with a CFR tight-knit roll up toque. Finished with an OG skull logo tag and available in a range of colours.
CFR Logo Balaclava
Keep your face warm on those cold days with our new CFR balaclavas featuring the OG CFR flaming skull logo. Tight fitting enough to go under a he...
View full detailsCFR Metal Snowboard Direct Tunnel Mount
The snowboard rack tested and approved by snowboarders Eric Jackson, Bjorn Leines and Mads Johnson. The Metal snowboard rack System is one of the l...
View full detailsCFR LINK-IT-UP Rack
The CFR LINK-IT-UP® Rack is the latest evolution of our rack making technology. The LINK-IT-UP® Rack enables you to install or remove your rack in ...
View full detailsCFR Tunnel Armour
CFR Tunnel Armour attaches to the side of your snowmobile tunnel with long-lasting 3M adhesive to prevent boots/skis/snowboards from scratching you...
View full detailsCFR Crow Bar Pad for 7/8" Bars
The Crowbar Pad is for 7/8" non-oversized handlebars. Works great on the Crowbar, 29er and the new Misfit SD handlebar. The softer durometer rubber...
View full details